WiFi Range Extender
  • Item No. : EXT1
  • Product Name : WiFi Range Extender for Phantom 3 Standard/SE
Easy Install
Description
Our antenna kits will extend the range up to 4 times the DJI rating and help with the signal penetration around objects. Increases range from approx. 300m to up to 1200m. Actual range extension will depend on your exact deployment environment, and is not guaranteed.

Installation is relatively simple with guided YouTube video.

This item is for the DJI Phantom 3 Standard/SE only.
Features
DJI Phantom 3 Standard/SE WiFi Signal Range Extender Antenna Kit
  • DJI Phantom 3 Standard/SE WiFi Signal Range Extender Antenna Kit
  • Two customized high-gain 2.4GHz~2.591GHz 7dBi panel (LIVE VIEW & APP) & 1 5.8GHz 10dBi omni antenna, 1 5.8GHz 6dBi pane antenna with stand
  • Lightweight, durable, practical and convenient to use in compact design
  • Full range coverage, strong and stable signal improves both remote control and Wifi video connection performance.
  • Our antenna kits will extend the range up to 4 times the DJI rating


Product Review/Installation:


Installation Video (English):


DJI Phantom 3 Standard Firmware Upgrade/Downgrade Guide:


Instalación Kit de antenas (Español)


New Antenna Testing:




Max Range : 4554M (CE Mode)




DJI Phantom & Inspire one has two versions:

A. Operating Frequency (5.725 GHz – 5.825 GHz/ 2.4 GHz -2.591 GHz) for the worldwide markets
B. Operating Frequency 922.7 MHz – 927.7 MHz.-for Japan market only

If your drone is Japan version, please remind the seller that you need 922.7 MHz version.
Japan version is available.
 
Specification
UPC Code: 878587003369
 
Package Contents
 
Demo
Please be noted during Installation:

For starters, anyone saying this made their signal worse...didn't install it correctly. There are 3 wires that need to be popped off their connectors, they are held on by small dots of glue. Please use a small screwdriver and pulled the glue away from the connectors and pull up on the wire and they pop off (don't be afraid to use a little force, if they are on there properly it'll take a tug). 2 of those wires connect to little square antennas which are held on with glue again (you remove these).
Please pull up on the antenna while chipping away at the glue with screwdriver and they come off. The other wire is connected to the original antenna which you remove. Now here comes the part where you need to focus...snapping these 3 new wires onto their respective bases. You really have to snap them on or they won’t work.
(People having range issues after installing this mod probably didn't push down hard enough so these new connectors snapped tightly into place).
Once you have them tightly in place...pull up on them...if they come right off they are not on properly!! They should stay on there solidly when you pull up on them. Once you are sure they are on there tightly put a dot of hot glue on the connection to make sure they stay put. After that reassemble the controller and enjoy the range boost this setup will give you. It works, as long as you do it right.