ARG1205a , 5.8GHz Outdoor Signal Booster

5.8GHz Outdoor Signal Booster

Enlarge wireless signal in outdoor environments!

‧	This device can add strength radio signal to increase the effective range and coverage area for Wi-Fi communication.
‧	Simply attach the DC Injector with 2.4G Hz radio signal input plus the DC power feed to the outdoor unit and N type antenna. The outdoor booster increase range by providing transmit gain as well as low noise receive gain.
‧	The benefit for signal booster can save lots of wiring costs and easy to build wireless infrastructure for home or business use.
‧	With a solid aluminum construction the 5.8 GHz Outdoor Signal Booster is designed to give a massive boost in range for a standard 802.11a wireless signal. The outdoor unit amplifies the signal of any 802.11a device for up to 30dBm(1Watt) in power.

Model Name	ARG1205a (1W)
Operating Range	5150 ~ 5850 MHz
Operating Mode	Bi-directional, half-duplex, auto-switching via carrier sensing
Connector Type	N-type, female (50 ohm)
Tx Input Power	0 ~15 dBm
Output Power	1W
Receiver Gain	15 dBm typital
Noise Figure	5dB typical
LED Indicator	TX signal LED(Green) , Power LED(Yellow)
Power Consumption	9V @ 1.2A (MAX)
Frequency Response	±1 dB over operating range
Power Adaptor	7~9V /DC 110/220V /AC auto switching AC Adapter for DC Injector
Operating Temp.	-20 to +70℃
Operating Humidity	Up to 95% relative humidity
Material	Cast Aluminum
Lightning Protection	Direct DC ground at antenna connector
DC Surge Protection	At DC input from transmission cable
Outdoor Unit weight	345g
DC Injector weight	96g
Outdoor Unit (cm)	11.5cm(L) x 6.5cm(W) x 4.8cm(H)
DC Injector (cm)	10.2cm(L) x 3.6cm(W) x 2.6cm(H)
Package Contents	An Outdoor unit, the bi-directional booster DC Injector 7 ~ 9 V/DC 110/220 V/AC power adapter 30 cm SMA Male RP to N male RG316 cable Installation Guide
Package Weight	< 3 lbs